Tens Units

Features dual, isolated channels with asymmetrical, biphasic, square pulse rate. Protective caps over amplitude adjustment knobs prevent unintended changes to pulse amplitude. Pulse intensity is adjustable 0 - 80 mA peak into 500 ohm load into each channel. Pulse rate is adjustable 2 - 120 Hz. Includes caps over buttons, hard plastic carrying case, two lead wires, four electrodes (one pack), 9-volt battery and operation manual. Without timer.

Features dual, isolated channels with asymmetrical, biphasic, square pulse rate. Protective caps over amplitude adjustment knobs prevent unintended changes to pulse amplitude. Pulse intensity is adjustable 0 - 80 mA peak into 500 ohm load into each channel. Pulse rate is adjustable 2 - 120 Hz. Includes caps over buttons, hard plastic carrying case, two lead wires, four electrodes (one pack), 9-volt battery and operation manual. With timer.

Dual, isolated channels. Protective caps over amplitude adjustment knobs prevent unintended changes to pulse amplitude. Symmetrical balanced sine wave output. Two- or four-pad treatment. Pulse intensity is adjustable 0 - 60 mA peak each channel, constant current. Adjustable 4004 - 4160 Hz modulating frequency (CH 2). Includes two lead wires, four electrodes (one pack), hard plastic carrying case, instructions and AC adapter.

Portable, digital electrotherapy unit with dual, isolated channels. Cap and slide cover protect against accidental setting changes. Features seven modes: burst; continuous; modulation; strength-duration and rate modulation; strength duration and width modulation; synchronous; and alternation. 1 Hz - 160 Hz (adjustable), 1 Hz/step (1 Hz - 20 Hz), 5 Hz/step (20 Hz - 160 Hz) pulse rate. For TENS, LCD panel displays modes, pulse rate, pulse width, timer and channels. For EMS, LCD panel displays modes, pulse rate, ON time, OFF time, timer and channels.

Features dual, isolated channels with asymmetric, biphasic output, adjustable pulse amplitude and pulse rate. Protective caps over amplitude adjustment knobs prevent unintended changes to pulse amplitude. Liquid crystal display indicates operation modes and output. Five-mode operation: continuous; burst; modulation; strength, duration and rate modulation; and strength, duration and width modulation. Pulse rate is adjustable from 1 - 160 Hz. Includes 9-volt alkaline battery, two lead wires, four electrodes (one pack), hard plastic carrying case and instructions.

Features dual, isolated channels with asymmetrical, biphasic, square pulse rate. Protective caps over amplitude adjustment knobs prevent unintended changes to pulse amplitude. Pulse intensity is adjustable 0 - 80 mA peak into 500 ohm load each channel. Pulse rate is adjustable 2 - 120 Hz. Includes caps over buttons; hard, plastic carrying case; two lead wire; four electrodes; 9-volt battery and instruction manual. With timer.

EMS + 2 Electrotherapy stimulation system, sold by each.

EMS 1000 portable EMS unit. Sold by the each. Has: dual channel, three treatment modes, adjustable on/off cycling, on ramp control, amplitude control cover, 3-way durable belt clip, easy to use dials & control, durable carrying case.

EMS muscle stimulator, analog, dual-channel. Sold by each.

Dual-channel interferential unit. 4,000 Hz fixed carrier frequency. 1 - 150 Hz adjustable difference frequency. Four frequency shifts include continuous, 1/1 abrupt, 8/8 abrupt and 10/10 ramped. Symmetrical, biphasic, square waveform. Powered by DC adapter or 9-volt battery>br>Includes stimulator; lead wires; one pack. (4) electrodes; 9-volt battery; hard-sided, protective, plastic case; and instruction booklet.

Impulse ems d7 digital e-stim.

Dual-channel microcurrent unit. Modified, square, DC, biphasic waveform with pulses of 0.3 Hz, 8 Hz and 80 Hz, changing polarity at intervals of three seconds. Timer can be set for 20- and 40-minute treatment periods; or continuous. Includes stimulator; lead wires; one pack (4) electrodes; 9-volt battery; hard-sided, protective, plastic case; and instruction booklet.

Tens unit kit with accessories. Includes: Tens unit, 2 batteries, 8 pkgs of 2 x 2 cloth electrodes, 2- 2 oz bottles of Pre-Tens skin prep, 1-12 ounce bottle of Vitamen E tens lotion, 1 box of alcohol prep wipes.

3 mode TENS dual channel unit w/o timer. Includes: lead wires (2pcs), instruction manual, 1 pack of 4 electrodes, 9V battery and hard carrying case.

T.E.N.S./E.M.S. combination unit with digital controls and timer, digital controls.